Manual Hygrostat Faran

Plug & play hygrostat.

Very easy to use.

Made to connect directly to a humidifier

Switching capacity 2.2 A

Set the humidity control knob to the desired humidity level.

If you set the knob to 70%, then stops the humidifier to 70% rlv and starts again at 67% rlv.

Technical specifications :

Measuring range: 10% - 80%

Accuracy: +/- 5%

Dead band: 3%

Switching method: On / Off

Switching capacity: 2.2 A

Temperature: 10 ° C - 40 ° C

Sensor type: Nylon

Cord: 2 m


Pay attention :

Avoid humidifying the Hygostat itself.

Avoid direct heat or shock.


Installation:

Mount the Hygrostat at about 150 cm from the floor. There is an attachment point at the back of the unit.