Sanlight S2.1 Gen2

The 2nd edition of the Q-Series is more flexible and more attractive than ever. By using the latest 2mm² LED technology as well as by revising the secondary optics, Sanlight is able to bring even more light into the gardens of theirs customers.

This also prompted Sanlight to completely revise the product portfolio in order to live up to their position as market leader.

The most important features of the Q series Gen2 briefly summarized :

• Up to 15% more light on the cultivated area with the same power requirement

o SANlight is the first producer in Europe to use Osram 2mm² chip technology on all LEDs. We also improved secondary optics to minimize losses.

• Ready to Dim and Ready to Boost (Option availaible in decembre 2019)

o Each Q Series luminaire has an empty connector at the end of the luminaire. Different dimmers (magnetic dimming and Bluetooth dimmer) can be connected by the customer to this connector. Certified trading partners can increase the light output by 10% via this plug connection.

• High quality connectors

o For the 2nd generation, Sanlight rely on the highest quality connectors from Wieland, which have been proven for decades in commercial horticulture.

• The product range has been significantly expanded

o The Q-Series now starts at 50W with the Q1W (available mid 2020) and ends at 245W with the Q6W. In addition, Sanlight offer stretched L versions to provide just successors to the S-Series.

• ECO and EXPERT set ups

o In the future, Sanlight's customers will have the choice between maximum cost efficiency in acquisition and operation, or maximization of yield. The recommended ECO Set Ups are inexpensive to buy and operate and allow 50% energy savings to replace classic sodium vapor lamps. EXPERT set ups generate up to 20% more light with about 30% energy savings compared to NDL.

Q5W Gen2

  • Replacement for Q6W Gen1
  • lower Power Input (205W), but 15% more light output at the growing area.
  • Ready to dimm - dimmer can be ordered separately - plug and play system
  • High performance system for 120 x 120 tent

 

Q3WL Gen2

  • Replacement for Q4W Gen1
  • less Power Input (120W), but same light output as Q4W
  • Ready to dimm - dimmer can be ordered separately - plug and play system
  • Good performance system for 100 x 100cm tent

 

Q4WL

  • Stretched version of Q4W with 160W power consumption
  • 2 pcs. Can replace a 600W HPS in a 120 x 120 tent
  • Ready to dimm - dimmer can be ordered separately - plug and play system
  • Good performance system for a 120 x 120cm tent

 

Q4W

  • High performance system for a 100 x 100cm tent
  • 160W power consumption
  • Ready to dimm - dimmer can be ordered separately - plug and play system

 

Q6W

  • 245W power consumption
  • For bigger scaled projects….
  • Ready to dimm - dimmer can be ordered separately - plug and play system

You will find the new product folder for the Q-Series Gen2 : Here

Comments (0)

No comments at this moment

New comment